Discussion:
pap: WARNING: Authentication will fail unless a "known good" password is available
ahmet erkol
6 years ago
Permalink
Hi,

I installed freeradius 3.0.16 with mysql. But i have an error and warning
like this.

(0) pap: WARNING: No "known good" password found for the user. Not setting
Auth-Type
(0) pap: WARNING: Authentication will fail unless a "known good" password
is available

(0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
Reject

I couldn't find a solution.

This is the mysql radcheck table,

mysql> select * from radcheck;
+----+----------+--------------------+----+--------+
| id | username | attribute | op | value |
+----+----------+--------------------+----+--------+
| 8 | ahmet | User-Password | := | 123456 |
+----+----------+--------------------+----+--------+

This is the whole debug

Ready to process requests
(0) Received Access-Request Id 71 from 10.26.144.169:54792 to
10.9.15.250:1812 length 45
(0) User-Name = "ahmet"
(0) User-Password = "123456"
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "ahmet", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0) [eap] = noop
(0) sql: EXPAND %{User-Name}
(0) sql: --> ahmet
(0) sql: SQL-User-Name set to 'ahmet'
rlm_sql (sql): Reserved connection (1)
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql: --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'ahmet' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'ahmet' ORDER BY id
(0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'ahmet'
ORDER BY priority
(0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'ahmet' ORDER BY priority
(0) sql: User not found in any groups
rlm_sql (sql): Released connection (1)
Need 4 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used
(0) [sql] = notfound
(0) [expiration] = noop
(0) [logintime] = noop
(0) pap: WARNING: No "known good" password found for the user. Not setting
Auth-Type
(0) pap: WARNING: Authentication will fail unless a "known good" password
is available
(0) [pap] = noop
(0) } # authorize = ok
(0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
Reject
(0) Failed to authenticate the user
(0) Using Post-Auth-Type Reject
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Post-Auth-Type REJECT {
(0) sql: EXPAND .query
(0) sql: --> .query
(0) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (2)
(0) sql: EXPAND %{User-Name}
(0) sql: --> ahmet
(0) sql: SQL-User-Name set to 'ahmet'
(0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')
(0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( 'ahmet', '123456', 'Access-Reject', '2018-10-12 09:37:39')
(0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate) VALUES ( 'ahmet', '123456', 'Access-Reject', '2018-10-12
09:37:39')
(0) sql: SQL query returned: success
(0) sql: 1 record(s) updated
rlm_sql (sql): Released connection (2)
(0) [sql] = ok
(0) attr_filter.access_reject: EXPAND %{User-Name}
(0) attr_filter.access_reject: --> ahmet
(0) attr_filter.access_reject: Matched entry DEFAULT at line 11
(0) [attr_filter.access_reject] = updated
(0) [eap] = noop
(0) policy remove_reply_message_if_eap {
(0) if (&reply:EAP-Message && &reply:Reply-Message) {
(0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(0) else {
(0) [noop] = noop
(0) } # else = noop
(0) } # policy remove_reply_message_if_eap = noop
(0) } # Post-Auth-Type REJECT = updated
(0) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(0) Sending delayed response
(0) Sent Access-Reject Id 71 from 10.9.15.250:1812 to 10.26.144.169:54792
length 20
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 71 with timestamp +2
Ready to process requests
-
List info/subscribe/unsubscribe? See http://www.freeradius
Alan DeKok
6 years ago
Permalink
On Oct 12, 2018, at 6:38 AM, ahmet erkol <***@gmail.com> wrote:
> I installed freeradius 3.0.16 with mysql. But i have an error and warning
> like this.
>
> (0) pap: WARNING: No "known good" password found for the user. Not setting
> Auth-Type
> (0) pap: WARNING: Authentication will fail unless a "known good" password
> is available
>
> (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
> Reject
>
> I couldn't find a solution.

You have to set the "known good password" for the user.

> This is the mysql radcheck table,
>
> mysql> select * from radcheck;
> +----+----------+--------------------+----+--------+
> | id | username | attribute | op | value |
> +----+----------+--------------------+----+--------+
> | 8 | ahmet | User-Password | := | 123456 |
> +----+----------+--------------------+----+--------+

No, that's not correct. You have to set Cleartext-Password. All of the documentation and examples say to do this.

If you found something that says to use User-Password, then:

a) that documentation is 10+ years old

b) it's written by some third party who has nothing to do with FreeRADIUS

Alan DeKok.


-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.
ahmet erkol
6 years ago
Permalink
Hi,

I also configured Cleartext-Password. But the result is same

Ready to process requests

(1) Received Access-Request Id 72 from 10.26.144.169:51938 to
10.9.15.250:1812 length 45
(1) User-Name = "ahmet"
(1) User-Password = "123456"
(1) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "ahmet", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: No EAP-Message, not doing EAP
(1) [eap] = noop
(1) sql: EXPAND %{User-Name}
(1) sql: --> ahmet
(1) sql: SQL-User-Name set to 'ahmet'
rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 4072
seconds
rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 4072
seconds
rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 4072
seconds
rlm_sql (sql): Closing connection (5): Hit idle_timeout, was idle for 4072
seconds
rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 4070
seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql (sql): Closing connection (6): Hit idle_timeout, was idle for 4070
seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 4070
seconds
rlm_sql (sql): You probably need to lower "min"
rlm_sql (sql): 0 of 0 connections in use. You may need to increase "spare"
rlm_sql (sql): Opening additional connection (7), 1 of 32 pending slots used
rlm_sql (sql): Reserved connection (7)
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql: --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'ahmet' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'ahmet' ORDER BY id
(1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(1) sql: --> SELECT groupname FROM radusergroup WHERE username = 'ahmet'
ORDER BY priority
(1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'ahmet' ORDER BY priority
(1) sql: User not found in any groups
rlm_sql (sql): Released connection (7)
Need 2 more connections to reach min connections (3)
rlm_sql (sql): Opening additional connection (8), 1 of 31 pending slots used
(1) [sql] = notfound
(1) [expiration] = noop
(1) [logintime] = noop
(1) pap: WARNING: No "known good" password found for the user. Not setting
Auth-Type
(1) pap: WARNING: Authentication will fail unless a "known good" password
is available
(1) [pap] = noop
(1) } # authorize = ok
(1) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
Reject
(1) Failed to authenticate the user
(1) Using Post-Auth-Type Reject
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Post-Auth-Type REJECT {
(1) sql: EXPAND .query
(1) sql: --> .query
(1) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (7)
(1) sql: EXPAND %{User-Name}
(1) sql: --> ahmet
(1) sql: SQL-User-Name set to 'ahmet'
(1) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')
(1) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( 'ahmet', '123456', 'Access-Reject', '2018-10-12 10:45:29')
(1) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate) VALUES ( 'ahmet', '123456', 'Access-Reject', '2018-10-12
10:45:29')
(1) sql: SQL query returned: success
(1) sql: 1 record(s) updated
rlm_sql (sql): Released connection (7)
(1) [sql] = ok
(1) attr_filter.access_reject: EXPAND %{User-Name}
(1) attr_filter.access_reject: --> ahmet
(1) attr_filter.access_reject: Matched entry DEFAULT at line 11
(1) [attr_filter.access_reject] = updated
(1) [eap] = noop
(1) policy remove_reply_message_if_eap {
(1) if (&reply:EAP-Message && &reply:Reply-Message) {
(1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(1) else {
(1) [noop] = noop
(1) } # else = noop
(1) } # policy remove_reply_message_if_eap = noop
(1) } # Post-Auth-Type REJECT = updated
(1) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(1) Sending delayed response
(1) Sent Access-Reject Id 72 from 10.9.15.250:1812 to 10.26.144.169:51938
length 20
Waking up in 3.9 seconds.
(1) Cleaning up request packet ID 72 with timestamp +4072
Ready to process requests


mysql> select * from radcheck;
+----+----------+--------------------+----+--------+
| id | username | attribute | op | value |
+----+----------+--------------------+----+--------+
| 10 | ahmet | Cleartext-Password | := | 123456 |
+----+----------+--------------------+----+--------+

Alan DeKok <***@deployingradius.com>, 12 Eki 2018 Cum, 13:42 tarihinde
şunu yazdı:

> On Oct 12, 2018, at 6:38 AM, ahmet erkol <***@gmail.com> wrote:
> > I installed freeradius 3.0.16 with mysql. But i have an error and warning
> > like this.
> >
> > (0) pap: WARNING: No "known good" password found for the user. Not
> setting
> > Auth-Type
> > (0) pap: WARNING: Authentication will fail unless a "known good" password
> > is available
> >
> > (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
> > Reject
> >
> > I couldn't find a solution.
>
> You have to set the "known good password" for the user.
>
> > This is the mysql radcheck table,
> >
> > mysql> select * from radcheck;
> > +----+----------+--------------------+----+--------+
> > | id | username | attribute | op | value |
> > +----+----------+--------------------+----+--------+
> > | 8 | ahmet | User-Password | := | 123456 |
> > +----+----------+--------------------+----+--------+
>
> No, that's not correct. You have to set Cleartext-Password. All of the
> documentation and examples say to do this.
>
> If you found something that says to use User-Password, then:
>
> a) that documentation is 10+ years old
>
> b) it's written by some third party who has nothing to do with FreeRADIUS
>
> Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://w
Matthew Newton
6 years ago
Permalink
On Fri, 2018-10-12 at 13:46 +0300, ahmet erkol wrote:
> I also configured Cleartext-Password. But the result is same

Post the full debug output.

http://wiki.freeradius.org/list-help

--
Matthew

-
List info/subscribe/unsubscr
ahmet erkol
6 years ago
Permalink
***@bam-ziyaretci-radius:/etc/freeradius/3.0/mods-available# freeradius -X
2>&1 | tee debugfile
FreeRADIUS Version 3.0.16
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/redis
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/sql
including configuration file
/etc/freeradius/3.0/mods-config/sql/main/sqlite/queries.conf
including configuration file /etc/freeradius/3.0/mods-enabled/rediswho
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/control
including configuration file
/etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/cui
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/3.0/sites-enabled/default
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client test {
ipaddr = 10.26.144.169
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client ibb-wlc {
ipaddr = 10.1.10.120
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = digest
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_radutmp
# Loading module "sradutmp" from file
/etc/freeradius/3.0/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loading module "radutmp" from file
/etc/freeradius/3.0/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_exec
# Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_redis
# Loading module "redis" from file /etc/freeradius/3.0/mods-enabled/redis
redis {
server = "127.0.0.1"
port = 6379
database = 0
query_timeout = 5
}
rlm_redis: libhiredis version: 0.13.3
# Loaded module rlm_always
# Loading module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_digest
# Loading module "digest" from file
/etc/freeradius/3.0/mods-enabled/digest
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loading module "ntlm_auth" from file
/etc/freeradius/3.0/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
files {
filename = "/etc/freeradius/3.0/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
preproxy_usersfile =
"/etc/freeradius/3.0/mods-config/files/pre-proxy"
}
# Loaded module rlm_detail
# Loading module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file
/etc/freeradius/3.0/mods-enabled/replicate
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename =
"/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
# Loaded module rlm_logintime
# Loading module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loading module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
detail {
filename =
"/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/freeradius/3.0/mods-enabled/dynamic_clients
# Loaded module rlm_sql
# Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
sql {
driver = "rlm_sql_null"
server = "localhost"
port = 3306
login = "radius"
password = <<< secret >>>
radius_db = "radius"
read_groups = yes
read_profiles = yes
read_clients = yes
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret, server
FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op
FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op
FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute,
Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute,
value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
group_membership_query = "SELECT groupname FROM radusergroup WHERE
username = '%{SQL-User-Name}' ORDER BY priority"
simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
'%{SQL-User-Name}' AND acctstoptime IS NULL"
simul_verify_query = "SELECT radacctid, acctsessionid, username,
nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol
FROM radacct WHERE username = '%{SQL-Group}' AND acctstoptime IS NULL"
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}.query}"
type {
accounting-on {
query = "UPDATE radacct SET acctstoptime =
%{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
(%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s',
acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE
acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
acctstarttime <= %{integer:Event-Timestamp}"
}
accounting-off {
query = "UPDATE radacct SET acctstoptime =
%{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
(%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} - strftime('%%s',
acctstarttime)), acctterminatecause = '%{Acct-Terminate-Cause}' WHERE
acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
acctstarttime <= %{integer:Event-Timestamp}"
}
start {
query = "INSERT INTO radacct (acctsessionid, acctuniqueid,
username, realm, nasipaddress, nasportid, nasporttype, acctstarttime,
acctupdatetime, acctstoptime, acctsessiontime, acctauthentic,
connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets,
calledstationid, callingstationid, acctterminatecause, servicetype,
framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}',
%{%{integer:Event-Timestamp}:-date('now')},
%{%{integer:Event-Timestamp}:-date('now')}, NULL, '0', '%{Acct-Authentic}',
'%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}')"
}
interim-update {
query = "UPDATE radacct SET acctupdatetime =
%{%{integer:Event-Timestamp}:-date('now')}, acctinterval = 0,
framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
%{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0},
acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 |
%{%{Acct-Output-Octets}:-0} WHERE AcctUniqueId =
'%{Acct-Unique-Session-Id}'"
}
stop {
query = "UPDATE radacct SET acctstoptime =
%{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
%{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0},
acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 |
%{%{Acct-Output-Octets}:-0}, acctterminatecause =
'%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
}
}
post-auth {
reference = ".query"
query = "INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')"
}
}
rlm_sql (sql): Driver rlm_sql_null (module rlm_sql_null) loaded and linked
Creating attribute SQL-Group
# Loaded module rlm_rediswho
# Loading module "rediswho" from file
/etc/freeradius/3.0/mods-enabled/rediswho
rediswho {
redis_module_instance = "redis"
trim_count = 15
Start {
insert = "LPUSH %{User-Name}
%l,%{Acct-Session-Id},%{NAS-IP-Address},%{Acct-Session-Time},%{Framed-IP-Address},%{%{Acct-Input-Gigawords}:-0},%{%{Acct-Output-Gigawords}:-0},%{%{Acct-Input-Octets}:-0},%{%{Acct-Output-Octets}:-0}"
trim = "LTRIM %{User-Name} 0 15"
expire = "EXPIRE %{User-Name} 86400"
}
Interim-Update {
insert = "LPUSH %{User-Name}
%l,%{Acct-Session-Id},%{NAS-IP-Address},%{Acct-Session-Time},%{Framed-IP-Address},%{%{Acct-Input-Gigawords}:-0},%{%{Acct-Output-Gigawords}:-0},%{%{Acct-Input-Octets}:-0},%{%{Acct-Output-Octets}:-0}"
trim = "LTRIM %{User-Name} 0 15"
expire = "EXPIRE %{User-Name} 86400"
}
Stop {
insert = "LPUSH %{User-Name}
%l,%{Acct-Session-Id},%{NAS-IP-Address},%{Acct-Session-Time},%{Framed-IP-Address},%{%{Acct-Input-Gigawords}:-0},%{%{Acct-Output-Gigawords}:-0},%{%{Acct-Input-Octets}:-0},%{%{Acct-Output-Octets}:-0}"
trim = "LTRIM %{User-Name} 0 15"
expire = "EXPIRE %{User-Name} 86400"
}
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_mschap
# Loading module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_expiration
# Loading module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_linelog
# Loading module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_unpack
# Loading module "unpack" from file
/etc/freeradius/3.0/mods-enabled/unpack
# Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
soh {
dhcp = yes
}
instantiate {
}
# Instantiating module "redis" from file
/etc/freeradius/3.0/mods-enabled/redis
rlm_redis (redis): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 86400
cleanup_interval = 300
idle_timeout = 600
retry_delay = 30
spread = no
}
rlm_redis (redis): Opening additional connection (0), 1 of 32 pending slots
used
rlm_redis (redis): Opening additional connection (1), 1 of 31 pending slots
used
rlm_redis (redis): Opening additional connection (2), 1 of 30 pending slots
used
rlm_redis (redis): Opening additional connection (3), 1 of 29 pending slots
used
rlm_redis (redis): Opening additional connection (4), 1 of 28 pending slots
used
# Instantiating module "reject" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "fail" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "ok" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "handled" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "invalid" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "userlock" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "notfound" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "noop" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "updated" from file
/etc/freeradius/3.0/mods-enabled/always
# Instantiating module "etc_passwd" from file
/etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "files" from file
/etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
# Instantiating module "auth_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "preprocess" from file
/etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
# Instantiating module "attr_filter.post-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec" found in filter list for realm
"DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file
/etc/freeradius/3.0/mods-config/attr_filter/accounting_response
# Instantiating module "logintime" from file
/etc/freeradius/3.0/mods-enabled/logintime
# Instantiating module "detail" from file
/etc/freeradius/3.0/mods-enabled/detail
# Instantiating module "IPASS" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "suffix" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "realmpercent" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ntdomain" from file
/etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "sql" from file
/etc/freeradius/3.0/mods-enabled/sql
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type,
secret, server FROM nas
rlm_sql (sql): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
# Instantiating module "rediswho" from file
/etc/freeradius/3.0/mods-enabled/rediswho
# Instantiating module "mschap" from file
/etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "cache_eap" from file
/etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
# Instantiating module "expiration" from file
/etc/freeradius/3.0/mods-enabled/expiration
# Instantiating module "pap" from file
/etc/freeradius/3.0/mods-enabled/pap
# Instantiating module "eap" from file
/etc/freeradius/3.0/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/3.0/certs"
pem_file_type = yes
private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
ca_file = "/etc/ssl/certs/ca-certificates.crt"
private_key_password = <<< secret >>>
dh_file = "/etc/freeradius/3.0/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
tls_max_version = ""
tls_min_version = "1.0"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "linelog" from file
/etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/freeradius/3.0/mods-enabled/linelog
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server inner-tunnel { # from file
/etc/freeradius/3.0/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/etc/freeradius/3.0/sites-enabled/inner-tunnel:331
} # server inner-tunnel
server default { # from file /etc/freeradius/3.0/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 36633
Listening on proxy address :: port 49987
Ready to process requests
(0) Received Access-Request Id 76 from 10.26.144.169:62588 to
10.9.15.250:1812 length 45
(0) User-Name = "ahmet"
(0) User-Password = "123456"
(0) # Executing section authorize from file
/etc/freeradius/3.0/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "ahmet", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0) [eap] = noop
(0) sql: EXPAND %{User-Name}
(0) sql: --> ahmet
(0) sql: SQL-User-Name set to 'ahmet'
rlm_sql (sql): Reserved connection (1)
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql: --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'ahmet' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'ahmet' ORDER BY id
(0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'ahmet'
ORDER BY priority
(0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'ahmet' ORDER BY priority
(0) sql: User not found in any groups
rlm_sql (sql): Released connection (1)
Need 4 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used
(0) [sql] = notfound
(0) [expiration] = noop
(0) [logintime] = noop
(0) pap: WARNING: No "known good" password found for the user. Not setting
Auth-Type
(0) pap: WARNING: Authentication will fail unless a "known good" password
is available
(0) [pap] = noop
(0) } # authorize = ok
(0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
Reject
(0) Failed to authenticate the user
(0) Using Post-Auth-Type Reject
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Post-Auth-Type REJECT {
(0) sql: EXPAND .query
(0) sql: --> .query
(0) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (2)
(0) sql: EXPAND %{User-Name}
(0) sql: --> ahmet
(0) sql: SQL-User-Name set to 'ahmet'
(0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')
(0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate)
VALUES ( 'ahmet', '123456', 'Access-Reject', '2018-10-12 10:58:45')
(0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate) VALUES ( 'ahmet', '123456', 'Access-Reject', '2018-10-12
10:58:45')
(0) sql: SQL query returned: success
(0) sql: 1 record(s) updated
rlm_sql (sql): Released connection (2)
(0) [sql] = ok
(0) attr_filter.access_reject: EXPAND %{User-Name}
(0) attr_filter.access_reject: --> ahmet
(0) attr_filter.access_reject: Matched entry DEFAULT at line 11
(0) [attr_filter.access_reject] = updated
(0) [eap] = noop
(0) policy remove_reply_message_if_eap {
(0) if (&reply:EAP-Message && &reply:Reply-Message) {
(0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(0) else {
(0) [noop] = noop
(0) } # else = noop
(0) } # policy remove_reply_message_if_eap = noop
(0) } # Post-Auth-Type REJECT = updated
(0) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(0) Sending delayed response
(0) Sent Access-Reject Id 76 from 10.9.15.250:1812 to 10.26.144.169:62588
length 20
Waking up in 3.9 seconds.
(0) Cleaning up request packet ID 76 with timestamp +4
Ready to process requests
^C


Matthew Newton <***@freeradius.org>, 12 Eki 2018 Cum, 13:51 tarihinde şunu
yazdı:

> On Fri, 2018-10-12 at 13:46 +0300, ahmet erkol wrote:
> > I also configured Cleartext-Password. But the result is same
>
> Post the full debug output.
>
> http://wiki.freeradius.org/list-help
>
> --
> Matthew
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscrib
Matthew Newton
6 years ago
Permalink
On Fri, 2018-10-12 at 13:59 +0300, ahmet erkol wrote:
> rlm_sql (sql): Driver rlm_sql_null (module rlm_sql_null) loaded and
> linked

Same as the poster the other day.

You've not configured rlm_sql to use mysql.

--
Matthew

-
List info/subscribe/unsubscribe? See http://www.freeradi
ahmet erkol
6 years ago
Permalink
How can I configure rlm_sql to use mysql?



Matthew Newton <***@freeradius.org>, 12 Eki 2018 Cum, 14:01 tarihinde şunu
yazdı:

> On Fri, 2018-10-12 at 13:59 +0300, ahmet erkol wrote:
> > rlm_sql (sql): Driver rlm_sql_null (module rlm_sql_null) loaded and
> > linked
>
> Same as the poster the other day.
>
> You've not configured rlm_sql to use mysql.
>
> --
> Matthew
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.fr
Matthew Newton
6 years ago
Permalink
On Fri, 2018-10-12 at 14:11 +0300, ahmet erkol wrote:
> How can I configure rlm_sql to use mysql?

Edit the same file you already set the mysql connect details and make
sure it's using the mysql driver, instead of the null driver.

--
Matthew

-
List info/subscribe/unsubscribe? See h
ahmet erkol
6 years ago
Permalink
sql {
# The sub-module to use to execute queries. This should match
# the database you're attempting to connect to.
#
# * rlm_sql_mysql
# * rlm_sql_mssql
# * rlm_sql_oracle
# * rlm_sql_postgresql
# * rlm_sql_sqlite
# * rlm_sql_null (log queries to disk)

When i uncomment the rlm_sql_mysql. Service doesn't start. It has failed.



Matthew Newton <***@freeradius.org>, 12 Eki 2018 Cum, 14:13 tarihinde şunu
yazdı:

> On Fri, 2018-10-12 at 14:11 +0300, ahmet erkol wrote:
> > How can I configure rlm_sql to use mysql?
>
> Edit the same file you already set the mysql connect details and make
> sure it's using the mysql driver, instead of the null driver.
>
> --
> Matthew
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradiu
Alan DeKok
6 years ago
Permalink
On Oct 12, 2018, at 7:20 AM, ahmet erkol <***@gmail.com> wrote:
>
> sql {
> # The sub-module to use to execute queries. This should match
> # the database you're attempting to connect to.
> #
> # * rlm_sql_mysql
> # * rlm_sql_mssql
> # * rlm_sql_oracle
> # * rlm_sql_postgresql
> # * rlm_sql_sqlite
> # * rlm_sql_null (log queries to disk)
>
> When i uncomment the rlm_sql_mysql. Service doesn't start. It has failed.

At this point, you need to start thinking for yourself.

*Read* the examples. *Read* the comments. And *think* about it. It's really not difficult. But you're making it difficult.

You're refusing to do any work yourself, and instead posting question after questions on the list. This means that you're asking everyone else to do the work for you.

Well, we're not going to. If you're too lazy to read the documentation, we're too lazy to explain it to you.

Alan DeKok.


-
List info/subscribe/unsubs
Rafael Labiak Olivastro
6 years ago
Permalink
Ahmet,



For PAP authentication you need to set “MD5-Password” and the content must be hashed to MD5.



User-Password and ClearText-Password are used to CHAP, MSCHAP and so on, because the password must be readable to do the chalenges and everything else.



Example:



insert into radcheck (attribute, op, value) VALUES (“MD5-Password”, “:=”, md5(“123456”));



PAP the authentication will be without encrypt (traffic) but the “content” wil be hashed.

So, there´s no security problem in it.



Rafael Labiak Olivastro

http://www.vigo.com.br







________________________________
De: Freeradius-Users <freeradius-users-bounces+rolivastro=***@lists.freeradius.org> em nome de Alan DeKok <***@deployingradius.com>
Enviado: Friday, October 12, 2018 7:23:41 AM
Para: FreeRadius users mailing list
Assunto: Re: pap: WARNING: Authentication will fail unless a "known good" password is available

On Oct 12, 2018, at 7:20 AM, ahmet erkol <***@gmail.com> wrote:
>
> sql {
> # The sub-module to use to execute queries. This should match
> # the database you're attempting to connect to.
> #
> # * rlm_sql_mysql
> # * rlm_sql_mssql
> # * rlm_sql_oracle
> # * rlm_sql_postgresql
> # * rlm_sql_sqlite
> # * rlm_sql_null (log queries to disk)
>
> When i uncomment the rlm_sql_mysql. Service doesn't start. It has failed.

At this point, you need to start thinking for yourself.

*Read* the examples. *Read* the comments. And *think* about it. It's really not difficult. But you're making it difficult.

You're refusing to do any work yourself, and instead posting question after questions on the list. This means that you're asking everyone else to do the work for you.

Well, we're not going to. If you're too lazy to read the documentation, we're too lazy to explain it to you.

Alan DeKok.


-
List info/subscribe/unsubscribe? See https://eur03.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.freeradius.org%2Flist%2Fusers.html&amp;data=02%7C01%7C%7Cb9d2850718f7437563ff08d6303538b4%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636749402464525731&amp;sdata=UH1Qksi8hlDLd2co7zhznXp237AmGBVAoTL65It3rak%3D&amp;reserved=0
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.htm
Alan Buxey
6 years ago
Permalink
hi,

When i uncomment the rlm_sql_mysql. Service doesn't start. It has failed.
>

so, you've set

driver = "rlm_sql_mysql"

..so , whats the error you are getting? whats printed to screen/log ?
throw us some clues here :)

alan
-
List info/subscribe/unsubscribe? See http://www.freer
Alan DeKok
6 years ago
Permalink
On Oct 12, 2018, at 7:01 AM, Matthew Newton <***@freeradius.org> wrote:
>
> On Fri, 2018-10-12 at 13:59 +0300, ahmet erkol wrote:
>> rlm_sql (sql): Driver rlm_sql_null (module rlm_sql_null) loaded and
>> linked
>
> Same as the poster the other day.
>
> You've not configured rlm_sql to use mysql.

I've pushed a change will will cause there rlm_sql_null module to produce LARGE WARNINGS if anyone uses it for SELECT statements.

Hopefully people will read those.

Alan DeKok.


-
List info/subscribe/unsu
Matthew Newton
6 years ago
Permalink
On Fri, 2018-10-12 at 07:15 -0400, Alan DeKok wrote:
> I've pushed a change will will cause there rlm_sql_null module to
> produce LARGE WARNINGS if anyone uses it for SELECT statements.
>
> Hopefully people will read those.

Yeah. Though I have my doubts...

I wondered about getting the rlm_sql debug output to print out the
driver or connect string on each select, but a warning is clearer.

--
Matthew

-
List info/subscribe/unsubscribe? See http
Loading...