Discussion:
Test Environment: Can PEAPv0 and PEAPv1 be setup together on the default instance?
(too old to reply)
whopeman
2012-03-01 18:25:13 UTC
Permalink
Hi,
I am fairly new to FreeRADIUS, so pelase bear with me a bit. I have
searched the forums and websites to find an implementation that allows me to
configure my server to process BOTH PEAP MSCHAP and PEAP/EAP-GTC (v0 and
v1). I have not found anyone trying to do this, but I am not working on a
production system this is for test purposes.

My GOAL:
I am working to setup a test environment that allows us to test our products
using EAP-TLS, EAP-TTLS, LEAP, PEAP/MSChap, and PEAP/EAP-GTC.

CURRENT:
What I have so far is a working system that processes everything except
PEAP/EAP-GTC. All authentication is performed through a local LDAP solution
(setup with CLEAR-TEXT again testing not production).

All of this is using the same client and the same certificates (i.e. the
same certificate that is being used for PEAP/MSCHAP is being used for
PEAP/EAP-GTC for tunnel authentication). What I am seeing in the logs is
the standard check your certificates message (as seen below in the radiusd
-X log). Like I said it is the same cert and client that works for
PEAPv0... so I am guessing this is not the actual problem.

I have run wireshark and grabbed the packet traces as well, when my client
connects it requests PEAP as the preferred auth type but FR seems to be
pushing v0 as the request type and does not seem to be allowing for v1. My
client does not handle this gracefully.

My QUESTION:
Is there an easy way to configure FR to allow for both types of requests? I
have been looking at the virtual server options without much luck in
understanding how to configure a secondary virtual server to provide a GTC
interface. If that is a recommendation, any guidance on setting up a
straight EAP-GTC via LDAP virtual server would be appreciated.

Thanks in advanced for any assistance. Logs below:

FreeRADIUS Version 2.1.12, for host x86_64-suse-linux-gnu, built on Feb 13
2012 at 14:07:11
Copyright (C) 1999-2009 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/modules/
including configuration file /etc/raddb/modules/cui
including configuration file /etc/raddb/modules/pam
including configuration file /etc/raddb/modules/pap
including configuration file /etc/raddb/modules/otp
including configuration file /etc/raddb/modules/soh
including configuration file /etc/raddb/modules/chap
including configuration file /etc/raddb/modules/echo
including configuration file /etc/raddb/modules/exec
including configuration file /etc/raddb/modules/expr
including configuration file /etc/raddb/modules/ldap
including configuration file /etc/raddb/modules/krb5
including configuration file /etc/raddb/modules/perl
including configuration file /etc/raddb/modules/unix
including configuration file /etc/raddb/modules/inner-eap
including configuration file /etc/raddb/modules/radutmp
including configuration file /etc/raddb/modules/counter
including configuration file /etc/raddb/modules/opendirectory
including configuration file /etc/raddb/modules/acct_unique
including configuration file /etc/raddb/modules/files
including configuration file /etc/raddb/modules/realm
including configuration file /etc/raddb/modules/redis
including configuration file /etc/raddb/modules/wimax
including configuration file /etc/raddb/modules/mac2vlan
including configuration file /etc/raddb/modules/replicate
including configuration file /etc/raddb/modules/linelog
including configuration file /etc/raddb/modules/sqlcounter_expire_on_login
including configuration file /etc/raddb/modules/detail.example.com
including configuration file /etc/raddb/modules/checkval
including configuration file /etc/raddb/modules/ntlm_auth
including configuration file /etc/raddb/modules/logintime
including configuration file /etc/raddb/modules/sql_log
including configuration file /etc/raddb/modules/sradutmp
including configuration file /etc/raddb/modules/always
including configuration file /etc/raddb/modules/attr_rewrite
including configuration file /etc/raddb/modules/detail
including configuration file /etc/raddb/modules/digest
including configuration file /etc/raddb/modules/dynamic_clients
including configuration file /etc/raddb/modules/ippool
including configuration file /etc/raddb/modules/mac2ip
including configuration file /etc/raddb/modules/mschap
including configuration file /etc/raddb/modules/smbpasswd
including configuration file /etc/raddb/modules/passwd
including configuration file /etc/raddb/modules/policy
including configuration file /etc/raddb/modules/smsotp
including configuration file /etc/raddb/modules/etc_group
including configuration file /etc/raddb/modules/preprocess
including configuration file /etc/raddb/modules/attr_filter
including configuration file /etc/raddb/modules/detail.log
including configuration file /etc/raddb/modules/rediswho
including configuration file /etc/raddb/modules/expiration
including configuration file /etc/raddb/eap.conf
including configuration file /etc/raddb/policy.conf
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
including configuration file /etc/raddb/sites-enabled/control-socket
main {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
including dictionary file /etc/raddb/dictionary
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
}
security {
max_attributes = 200
reject_delay = 1
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = "testing123"
response_window = 20
max_outstanding = 65536
require_message_authenticator = yes
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
num_answers_to_alive = 3
num_pings_to_alive = 3
revive_interval = 120
status_check_timeout = 4
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = "testing123"
nastype = "other"
}
client 10.0.12.100 {
require_message_authenticator = no
secret = "V0c0ll3ct"
shortname = "SQA_WLC"
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating module "exec" from file /etc/raddb/modules/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
}
Module: Linked to module rlm_expr
Module: Instantiating module "expr" from file /etc/raddb/modules/expr
Module: Linked to module rlm_expiration
Module: Instantiating module "expiration" from file
/etc/raddb/modules/expiration
expiration {
reply-message = "Password Has Expired "
}
Module: Linked to module rlm_logintime
Module: Instantiating module "logintime" from file
/etc/raddb/modules/logintime
logintime {
reply-message = "You are calling outside your allowed timespan "
minimum-timeout = 60
}
}
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
modules {
Module: Creating Auth-Type = digest
Module: Creating Post-Auth-Type = REJECT
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating module "pap" from file /etc/raddb/modules/pap
pap {
encryption_scheme = "auto"
auto_header = no
}
Module: Linked to module rlm_chap
Module: Instantiating module "chap" from file /etc/raddb/modules/chap
Module: Linked to module rlm_mschap
Module: Instantiating module "mschap" from file /etc/raddb/modules/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = no
allow_retry = yes
}
Module: Linked to module rlm_digest
Module: Instantiating module "digest" from file /etc/raddb/modules/digest
Module: Linked to module rlm_unix
Module: Instantiating module "unix" from file /etc/raddb/modules/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Module: Linked to module rlm_eap
Module: Instantiating module "eap" from file /etc/raddb/eap.conf
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 4096
}
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
Module: Linked to sub-module rlm_eap_tls
Module: Instantiating eap-tls
tls {
rsa_key_exchange = no
dh_key_exchange = yes
rsa_key_length = 512
dh_key_length = 512
verify_depth = 0
CA_path = "/u02/security/EapCA"
pem_file_type = yes
private_key_file = "/u02/security/FreeRADIUS/FreeRADIUS.pem"
certificate_file = "/u02/security/FreeRADIUS/FreeRADIUS.pem"
CA_file = "/u02/security/EapCA/EapCA.pem"
private_key_password = "FreeRADIUS"
dh_file = "/u02/security/FreeRADIUS/dh"
random_file = "/u02/security/FreeRADIUS/random"
fragment_size = 1024
include_length = yes
check_crl = no
cipher_list = "DEFAULT"
make_cert_command = "/u02/security/FreeRADIUS/bootstrap"
ecdh_curve = "prime256v1"
cache {
enable = no
lifetime = 0
max_entries = 255
}
verify {
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
}
}
Module: Linked to sub-module rlm_eap_ttls
Module: Instantiating eap-ttls
ttls {
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
}
Module: Linked to sub-module rlm_eap_peap
Module: Instantiating eap-peap
peap {
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
}
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating module "preprocess" from file
/etc/raddb/modules/preprocess
preprocess {
huntgroups = "/etc/raddb/huntgroups"
hints = "/etc/raddb/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
Module: Linked to module rlm_realm
Module: Instantiating module "suffix" from file /etc/raddb/modules/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
Module: Linked to module rlm_files
Module: Instantiating module "files" from file /etc/raddb/modules/files
files {
usersfile = "/etc/raddb/users"
acctusersfile = "/etc/raddb/acct_users"
preproxy_usersfile = "/etc/raddb/preproxy_users"
compat = "no"
}
Module: Linked to module rlm_ldap
Module: Instantiating module "ldap" from file /etc/raddb/modules/ldap
ldap {
server = "eng-eap-auth"
port = 389
password = "OpenDSAdmin"
identity = "cn=OpenDSAdmin"
net_timeout = 1
timeout = 4
timelimit = 3
tls_mode = no
start_tls = no
tls_require_cert = "allow"
tls {
start_tls = no
require_cert = "allow"
}
basedn = "dc=eap,dc=eng"
filter = "(uid=%{%{Stripped-User-Name}:-%{User-Name}})"
base_filter = "(objectclass=radiusprofile)"
auto_header = no
access_attr_used_for_allow = yes
groupname_attribute = "cn"
groupmembership_filter =
"(|(&(objectClass=GroupOfNames)(member=%{Ldap-UserDn}))(&(objectClass=GroupOfUniqueNames)(uniquemember=%{Ldap-UserDn})))"
dictionary_mapping = "/etc/raddb/ldap.attrmap"
ldap_debug = 0
ldap_connections_number = 5
compare_check_items = no
do_xlat = yes
edir_account_policy_check = no
set_auth_type = yes
keepalive {
interval = 3
}
}
rlm_ldap: Registering ldap_groupcmp for Ldap-Group
rlm_ldap: Registering ldap_xlat with xlat_name ldap
rlm_ldap: Over-riding set_auth_type, as there is no module ldap listed in
the "authenticate" section.
rlm_ldap: reading ldap<->radius mappings from file /etc/raddb/ldap.attrmap
rlm_ldap: LDAP radiusCheckItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusReplyItem mapped to RADIUS $GENERIC$
rlm_ldap: LDAP radiusAuthType mapped to RADIUS Auth-Type
rlm_ldap: LDAP radiusSimultaneousUse mapped to RADIUS Simultaneous-Use
rlm_ldap: LDAP radiusCalledStationId mapped to RADIUS Called-Station-Id
rlm_ldap: LDAP radiusCallingStationId mapped to RADIUS Calling-Station-Id
rlm_ldap: LDAP lmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP ntPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP sambaLmPassword mapped to RADIUS LM-Password
rlm_ldap: LDAP sambaNtPassword mapped to RADIUS NT-Password
rlm_ldap: LDAP dBCSPwd mapped to RADIUS LM-Password
rlm_ldap: LDAP userPassword mapped to RADIUS Password-With-Header
rlm_ldap: LDAP acctFlags mapped to RADIUS SMB-Account-CTRL-TEXT
rlm_ldap: LDAP radiusExpiration mapped to RADIUS Expiration
rlm_ldap: LDAP radiusNASIpAddress mapped to RADIUS NAS-IP-Address
rlm_ldap: LDAP radiusServiceType mapped to RADIUS Service-Type
rlm_ldap: LDAP radiusFramedProtocol mapped to RADIUS Framed-Protocol
rlm_ldap: LDAP radiusFramedIPAddress mapped to RADIUS Framed-IP-Address
rlm_ldap: LDAP radiusFramedIPNetmask mapped to RADIUS Framed-IP-Netmask
rlm_ldap: LDAP radiusFramedRoute mapped to RADIUS Framed-Route
rlm_ldap: LDAP radiusFramedRouting mapped to RADIUS Framed-Routing
rlm_ldap: LDAP radiusFilterId mapped to RADIUS Filter-Id
rlm_ldap: LDAP radiusFramedMTU mapped to RADIUS Framed-MTU
rlm_ldap: LDAP radiusFramedCompression mapped to RADIUS Framed-Compression
rlm_ldap: LDAP radiusLoginIPHost mapped to RADIUS Login-IP-Host
rlm_ldap: LDAP radiusLoginService mapped to RADIUS Login-Service
rlm_ldap: LDAP radiusLoginTCPPort mapped to RADIUS Login-TCP-Port
rlm_ldap: LDAP radiusCallbackNumber mapped to RADIUS Callback-Number
rlm_ldap: LDAP radiusCallbackId mapped to RADIUS Callback-Id
rlm_ldap: LDAP radiusFramedIPXNetwork mapped to RADIUS Framed-IPX-Network
rlm_ldap: LDAP radiusClass mapped to RADIUS Class
rlm_ldap: LDAP radiusSessionTimeout mapped to RADIUS Session-Timeout
rlm_ldap: LDAP radiusIdleTimeout mapped to RADIUS Idle-Timeout
rlm_ldap: LDAP radiusTerminationAction mapped to RADIUS Termination-Action
rlm_ldap: LDAP radiusLoginLATService mapped to RADIUS Login-LAT-Service
rlm_ldap: LDAP radiusLoginLATNode mapped to RADIUS Login-LAT-Node
rlm_ldap: LDAP radiusLoginLATGroup mapped to RADIUS Login-LAT-Group
rlm_ldap: LDAP radiusFramedAppleTalkLink mapped to RADIUS
Framed-AppleTalk-Link
rlm_ldap: LDAP radiusFramedAppleTalkNetwork mapped to RADIUS
Framed-AppleTalk-Network
rlm_ldap: LDAP radiusFramedAppleTalkZone mapped to RADIUS
Framed-AppleTalk-Zone
rlm_ldap: LDAP radiusPortLimit mapped to RADIUS Port-Limit
rlm_ldap: LDAP radiusLoginLATPort mapped to RADIUS Login-LAT-Port
rlm_ldap: LDAP radiusReplyMessage mapped to RADIUS Reply-Message
rlm_ldap: LDAP radiusTunnelType mapped to RADIUS Tunnel-Type
rlm_ldap: LDAP radiusTunnelMediumType mapped to RADIUS Tunnel-Medium-Type
rlm_ldap: LDAP radiusTunnelPrivateGroupId mapped to RADIUS
Tunnel-Private-Group-Id
conns: 0x6c9850
Module: Checking preacct {...} for more modules to load
Module: Linked to module rlm_acct_unique
Module: Instantiating module "acct_unique" from file
/etc/raddb/modules/acct_unique
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address,
NAS-Port"
}
Module: Checking accounting {...} for more modules to load
Module: Linked to module rlm_detail
Module: Instantiating module "detail" from file /etc/raddb/modules/detail
detail {
detailfile =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
detailperm = 384
dirperm = 493
locking = no
log_packet_header = no
}
Module: Linked to module rlm_radutmp
Module: Instantiating module "radutmp" from file /etc/raddb/modules/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
perm = 384
callerid = yes
}
Module: Linked to module rlm_attr_filter
Module: Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/modules/attr_filter
attr_filter attr_filter.accounting_response {
attrsfile = "/etc/raddb/attrs.accounting_response"
key = "%{User-Name}"
relaxed = no
}
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Instantiating module "attr_filter.access_reject" from file
/etc/raddb/modules/attr_filter
attr_filter attr_filter.access_reject {
attrsfile = "/etc/raddb/attrs.access_reject"
key = "%{User-Name}"
relaxed = no
}
} # modules
} # server
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
modules {
Module: Checking authenticate {...} for more modules to load
Module: Checking authorize {...} for more modules to load
Module: Checking session {...} for more modules to load
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
} # modules
} # server
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
}
listen {
type = "acct"
ipaddr = *
port = 0
}
listen {
type = "control"
listen {
socket = "/var/run/radiusd/radiusd.sock"
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
... adding new socket proxy address * port 32774
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on command file /var/run/radiusd/radiusd.sock
Listening on authentication address 127.0.0.1 port 18120 as server
inner-tunnel
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=88,
length=163
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0201000e01706561707573657230
Message-Authenticator = 0x96d7e61227c67c001087e31d038751dc
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 14
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] attempting LDAP reconnection
[ldap] (re)connect to eng-eap-auth:389, authentication 0
[ldap] bind as cn=OpenDSAdmin/OpenDSAdmin to eng-eap-auth:389
[ldap] waiting for bind result ...
[ldap] Bind was successful
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 88 to 10.0.12.100 port 32769
EAP-Message = 0x0102001604106161c64876ee8e168904949a27509d24
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x669d9c54669f980162c5c19a61c497cc
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=89,
length=173
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020200060319
State = 0x669d9c54669f980162c5c19a61c497cc
Message-Authenticator = 0x09bf99497269530bdd70e1c66d4f4501
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 89 to 10.0.12.100 port 32769
EAP-Message = 0x010300061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x669d9c54679e850162c5c19a61c497cc
Finished request 1.
Going to the next request
Waking up in 4.7 seconds.
Cleaning up request 0 ID 88 with timestamp +59
Waking up in 0.2 seconds.
Cleaning up request 1 ID 89 with timestamp +59
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x669d9c54679e8501 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ready to process requests.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=90,
length=163
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0201000e01706561707573657230
Message-Authenticator = 0x27ced1e5a2a32a1a1345bd6c0d3d3266
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 14
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 90 to 10.0.12.100 port 32769
EAP-Message = 0x0102001604104a074f41e833b0dec10667681ba64e61
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xbd9fddc6bd9dd9842b7990ab680bfb25
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=91,
length=173
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020200060319
State = 0xbd9fddc6bd9dd9842b7990ab680bfb25
Message-Authenticator = 0xbd799dda9835151d9e485733a4e04643
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 91 to 10.0.12.100 port 32769
EAP-Message = 0x010300061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xbd9fddc6bc9cc4842b7990ab680bfb25
Finished request 3.
Going to the next request
Waking up in 4.7 seconds.
Cleaning up request 2 ID 90 with timestamp +90
Waking up in 0.2 seconds.
Cleaning up request 3 ID 91 with timestamp +90
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0xbd9fddc6bc9cc484 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ready to process requests.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=92,
length=163
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0201000e01706561707573657230
Message-Authenticator = 0xd0588889f2bc0833b103cacae5cad8a6
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 14
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 92 to 10.0.12.100 port 32769
EAP-Message = 0x0102001604108ed49b18ef352cd93a46d489c7659377
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf02e5ad7f02c5e675a0752e53820512b
Finished request 4.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=93,
length=173
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020200060319
State = 0xf02e5ad7f02c5e675a0752e53820512b
Message-Authenticator = 0x0c3fe3419ee874b2d8e44647580871db
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 93 to 10.0.12.100 port 32769
EAP-Message = 0x010300061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xf02e5ad7f12d43675a0752e53820512b
Finished request 5.
Going to the next request
Waking up in 4.6 seconds.
Cleaning up request 4 ID 92 with timestamp +96
Waking up in 0.3 seconds.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=94,
length=163
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0201000e01706561707573657230
Message-Authenticator = 0x837a1edb18992340b636ade370f6a9e1
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 14
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 94 to 10.0.12.100 port 32769
EAP-Message = 0x010200160410b17289685d6bd1fb79aa16b845095665
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xde2490a2de2694d19fa97aded2db7696
Finished request 6.
Going to the next request
Waking up in 0.2 seconds.
Cleaning up request 5 ID 93 with timestamp +96
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0xf02e5ad7f12d4367 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Waking up in 4.7 seconds.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=95,
length=173
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020200060319
State = 0xde2490a2de2694d19fa97aded2db7696
Message-Authenticator = 0x62895659920d2a77420c049fad099eb3
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 95 to 10.0.12.100 port 32769
EAP-Message = 0x010300061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xde2490a2df2789d19fa97aded2db7696
Finished request 7.
Going to the next request
Waking up in 4.7 seconds.
Cleaning up request 6 ID 94 with timestamp +101
Waking up in 0.2 seconds.
Cleaning up request 7 ID 95 with timestamp +101
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0xde2490a2df2789d1 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ready to process requests.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=96,
length=163
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0201000e01706561707573657230
Message-Authenticator = 0xeed47dd183d35ef705309aed280380b9
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 14
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 96 to 10.0.12.100 port 32769
EAP-Message = 0x0102001604104c1f599a051f9cf66475e0b201faec33
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x40d9ea6940dbeeddc07bb829a9a246f2
Finished request 8.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=97,
length=173
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020200060319
State = 0x40d9ea6940dbeeddc07bb829a9a246f2
Message-Authenticator = 0xa5b48193ce88d45547ffe563f44cb38c
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 97 to 10.0.12.100 port 32769
EAP-Message = 0x010300061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x40d9ea6941daf3ddc07bb829a9a246f2
Finished request 9.
Going to the next request
Waking up in 4.7 seconds.
Cleaning up request 8 ID 96 with timestamp +106
Waking up in 0.2 seconds.
Cleaning up request 9 ID 97 with timestamp +107
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x40d9ea6941daf3dd did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ready to process requests.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=98,
length=163
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0201000e01706561707573657230
Message-Authenticator = 0xa8260649541b620f4171c92fafe48574
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 14
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 98 to 10.0.12.100 port 32769
EAP-Message = 0x010200160410e38f1ec4355e8913dbd8852155eb8656
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xc7b9e4c8c7bbe047683488285fa13096
Finished request 10.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=99,
length=173
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020200060319
State = 0xc7b9e4c8c7bbe047683488285fa13096
Message-Authenticator = 0x600121742fea5e5c198ef8919349b136
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 99 to 10.0.12.100 port 32769
EAP-Message = 0x010300061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xc7b9e4c8c6bafd47683488285fa13096
Finished request 11.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=100,
length=163
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0201000e01706561707573657230
Message-Authenticator = 0x1be2df4cc42d03da82f1072f3b742e22
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 14
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 100 to 10.0.12.100 port 32769
EAP-Message = 0x010200160410d1c7652fddc104874e938001b03b4d98
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x29876a9b29856eba5ffb610f8ca69d4f
Finished request 12.
Going to the next request
Waking up in 0.9 seconds.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=101,
length=173
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020200060319
State = 0x29876a9b29856eba5ffb610f8ca69d4f
Message-Authenticator = 0x956d4ce62de7b261fbc37090e08216b8
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 101 to 10.0.12.100 port 32769
EAP-Message = 0x010300061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x29876a9b288473ba5ffb610f8ca69d4f
Finished request 13.
Going to the next request
Waking up in 0.9 seconds.
Cleaning up request 10 ID 98 with timestamp +113
Cleaning up request 11 ID 99 with timestamp +113
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0xc7b9e4c8c6bafd47 did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Waking up in 4.0 seconds.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=102,
length=163
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0201000e01706561707573657230
Message-Authenticator = 0x1d80cab28d231ff42da3476ff5a0881f
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 1 length 14
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] EAP Identity
[eap] processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 102 to 10.0.12.100 port 32769
EAP-Message = 0x0102001604105726294855175db3790c84814633b804
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1ecf498d1ecd4dfa977d6d27468f439b
Finished request 14.
Going to the next request
Waking up in 0.9 seconds.
rad_recv: Access-Request packet from host 10.0.12.100 port 32769, id=103,
length=173
User-Name = "peapuser0"
Calling-Station-Id = "00-17-23-00-09-61"
Called-Station-Id = "00-0B-85-80-F7-F0:WARD_EAP"
NAS-Port = 4
NAS-IP-Address = 10.0.12.100
NAS-Identifier = "SQA_WLC"
Airespace-Wlan-Id = 15
Service-Type = Framed-User
Framed-MTU = 1300
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020200060319
State = 0x1ecf498d1ecd4dfa977d6d27468f439b
Message-Authenticator = 0xb94ad161665a96e6f0f21abac0791105
# Executing section authorize from file /etc/raddb/sites-enabled/default
+- entering group authorize {...}
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
++[digest] returns noop
[suffix] No '@' in User-Name = "peapuser0", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] returns noop
[eap] EAP packet type response id 2 length 6
[eap] No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[files] returns noop
[ldap] performing user authorization for peapuser0
[ldap] expand: %{Stripped-User-Name} ->
[ldap] ... expanding second conditional
[ldap] expand: %{User-Name} -> peapuser0
[ldap] expand: (uid=%{%{Stripped-User-Name}:-%{User-Name}}) ->
(uid=peapuser0)
[ldap] expand: dc=eap,dc=eng -> dc=eap,dc=eng
[ldap] ldap_get_conn: Checking Id: 0
[ldap] ldap_get_conn: Got Id: 0
[ldap] performing search in dc=eap,dc=eng, with filter (uid=peapuser0)
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
[ldap] userPassword -> Password-With-Header == "{CLEAR}peapuser0"
[ldap] looking for reply items in directory...
[ldap] user peapuser0 authorized to use remote access
[ldap] ldap_release_conn: Release Id: 0
++[ldap] returns ok
++[expiration] returns noop
++[logintime] returns noop
[pap] WARNING: Auth-Type already set. Not setting to PAP
++[pap] returns noop
Found Auth-Type = EAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group authenticate {...}
[eap] Request found, released from the list
[eap] EAP NAK
[eap] EAP-NAK asked for EAP-Type/peap
[eap] processing type tls
[tls] Initiate
[tls] Start returned 1
++[eap] returns handled
Sending Access-Challenge of id 103 to 10.0.12.100 port 32769
EAP-Message = 0x010300061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x1ecf498d1fcc50fa977d6d27468f439b
Finished request 15.
Going to the next request
Waking up in 0.9 seconds.
Cleaning up request 12 ID 100 with timestamp +117
Cleaning up request 13 ID 101 with timestamp +117
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x29876a9b288473ba did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Waking up in 4.0 seconds.
Cleaning up request 14 ID 102 with timestamp +121
Cleaning up request 15 ID 103 with timestamp +121
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
WARNING: !! EAP session for state 0x1ecf498d1fcc50fa did not finish!
WARNING: !! Please read http://wiki.freeradius.org/Certificate_Compatibility
WARNING:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Ready to process requests.


--
View this message in context: http://freeradius.1045715.n5.nabble.com/Test-Environment-Can-PEAPv0-and-PEAPv1-be-setup-together-on-the-default-instance-tp5528728p5528728.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Matthew Newton
2012-03-01 19:10:42 UTC
Permalink
Hi,
Post by whopeman
I have run wireshark and grabbed the packet traces as well, when my client
connects it requests PEAP as the preferred auth type but FR seems to be
pushing v0 as the request type and does not seem to be allowing for v1. My
client does not handle this gracefully.
Last I saw (looking at the comments in the FR rlm_eap_peap
source), PEAPv1 is not supported, only v0.

Matthew
--
Matthew Newton, Ph.D. <***@le.ac.uk>

Systems Architect (UNIX and Networks), Network Services,
I.T. Services, University of Leicester, Leicester LE1 7RH, United Kingdom

For IT help contact helpdesk extn. 2253, <***@le.ac.uk>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Fajar A. Nugraha
2012-03-02 03:30:13 UTC
Permalink
Post by Matthew Newton
Hi,
Post by whopeman
I have run wireshark and grabbed the packet traces as well, when my client
connects it requests PEAP as the preferred auth type but FR seems to be
pushing v0 as the request type and does not seem to be allowing for v1.  My
client does not handle this gracefully.
Last I saw (looking at the comments in the FR rlm_eap_peap
source), PEAPv1 is not supported, only v0.
Is there any documentation on where you need v1?

IIRC both PEAP-GTC and PEAP-MSCHAP should work just fine
--
Fajar
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Matthew Newton
2012-03-01 19:14:42 UTC
Permalink
Post by whopeman
connects it requests PEAP as the preferred auth type but FR seems to be
pushing v0 as the request type and does not seem to be allowing for v1. My
I was slightly wrong - the rlm_eap2 module does support it, but
it's experimental and not recommended for production use.

http://freeradius.org/features/eap.html

So you need to look at configuring eap2, rather than eap.

Matthew
--
Matthew Newton, Ph.D. <***@le.ac.uk>

Systems Architect (UNIX and Networks), Network Services,
I.T. Services, University of Leicester, Leicester LE1 7RH, United Kingdom

For IT help contact helpdesk extn. 2253, <***@le.ac.uk>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
whopeman
2012-03-02 13:15:05 UTC
Permalink
Hi Matthew,
Thanks for the update. I do see now that it is listed as experimental.
It is not very clear on that fact when looking at the wiki sites
http://wiki.freeradius.org/EAP as they list it as a supported EAP type. I
suppose I need to read foot notes more closely.
Once I started searching on the eap2 module I noticed several comments
about PEAPv1 support and that hostapd libraries need to be built.
I guess it is off to go grab hostapd and work on getting that built so
that I can recompile FR.

Thanks for the pointer.

Consider this question answered.


--Ward

PS. If i get a working solution I will post my steps for anyone else who is
willing to work with the experimental eap2 feature. That is one thing I
noted is lacking in most of the other posts.

--
View this message in context: http://freeradius.1045715.n5.nabble.com/Test-Environment-Can-PEAPv0-and-PEAPv1-be-setup-together-on-the-default-instance-tp5528728p5530922.html
Sent from the FreeRadius - User mailing list archive at Nabble.com.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Alan Buxey
2012-03-02 09:59:28 UTC
Permalink
Yep use some unlang to detect peapv1 and direct the request to eap2 module. (never used eap2 myself...though its the only way to EAP-FAST nirvana ;) )

alan
Phil Mayers
2012-03-02 11:40:12 UTC
Permalink
Post by whopeman
Hi,
I am fairly new to FreeRADIUS, so pelase bear with me a bit. I have
searched the forums and websites to find an implementation that allows me to
configure my server to process BOTH PEAP MSCHAP and PEAP/EAP-GTC (v0 and
v1). I have not found anyone trying to do this, but I am not working on a
production system this is for test purposes.
Virtually nothing uses PEAPv1, so it's not well supported.

Do you really need PEAPv1?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Alan DeKok
2012-03-03 08:38:32 UTC
Permalink
Post by whopeman
I am fairly new to FreeRADIUS, so pelase bear with me a bit. I have
searched the forums and websites to find an implementation that allows me to
configure my server to process BOTH PEAP MSCHAP and PEAP/EAP-GTC (v0 and
v1). I have not found anyone trying to do this, but I am not working on a
production system this is for test purposes.
Don't use PEAPv1. It's even less documented than PEAPv0. It's used
by pretty much no one.
Post by whopeman
I am working to setup a test environment that allows us to test our products
using EAP-TLS, EAP-TTLS, LEAP, PEAP/MSChap, and PEAP/EAP-GTC.
Don't use LEAP. It's insecure. Don't put it into new products, and
don't allow people to configure it.
Post by whopeman
What I have so far is a working system that processes everything except
PEAP/EAP-GTC. All authentication is performed through a local LDAP solution
(setup with CLEAR-TEXT again testing not production).
FreeRADIUS does this in the default install, and contains EAP tests
(src/tests) for all major EAP types.
Post by whopeman
I have run wireshark and grabbed the packet traces as well, when my client
connects it requests PEAP as the preferred auth type but FR seems to be
pushing v0 as the request type and does not seem to be allowing for v1. My
client does not handle this gracefully.
Then the client is broken, and should be fixed.
Post by whopeman
Is there an easy way to configure FR to allow for both types of requests?
Not really. By the time that the client has sent a PEAPv1 request,
the EAP session has started. You can't switch EAP sessions from the
"eap" module to the "eap2" module.
Post by whopeman
I
have been looking at the virtual server options without much luck in
understanding how to configure a secondary virtual server to provide a GTC
interface. If that is a recommendation, any guidance on setting up a
straight EAP-GTC via LDAP virtual server would be appreciated.
Read eap.conf. Look for "gtc". This is documented. It works in the
default install.

Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hopeman, Ward
2012-03-05 14:38:13 UTC
Permalink
Hi Alan,
Post by Alan DeKok
FreeRADIUS does this in the default install, and contains EAP tests
(src/tests) for all major EAP types.
I actually went and re-read the RFC for PEAP. I noted that a server that supports PEAP will reply with the highest supported version and the negotiation will go from there. So it should not be a matter of having to configure eap versus eap2. If I go with eap2 and get v1 working, it should support both v1 and v0. This is where I got confused, I missed the foot notes that PEAPv1 was only available in the experimental build with the eap2 module.
Post by Alan DeKok
Don't use PEAPv1. It's even less documented than PEAPv0. It's used by pretty much no one.
This unfortunately is not by choice on my part. I am required to provide lab setups for testing our products, based on what is in the product requirement documents. This falls into what our product managers want to support.
Post by Alan DeKok
Don't use LEAP. It's insecure. Don't put it into new products, and don't allow people to configure it.
As above, not really my choice, but I can't agree more. Fortunately this protocol seems to be for legacy support. I have been and continue to make recommendations to our product managers to remove support for unused and unsecure protocols.
Post by Alan DeKok
Then the client is broken, and should be fixed.
The client is not falling back to PEAPv0 as one might expect, and when I questioned the developers on this they told me it was working as designed. They want to ensure that when it gets configured for a specific protocol, that it fails unless it meets the requirements. Since our products go into controlled install environments, they wanted to tighten up the authentication requirements. Not robust, or quite following the RFC, but as designed. In this case refer above as the client was expecting v1.
Post by Alan DeKok
Not really. By the time that the client has sent a PEAPv1 request, the EAP session has started. You can't switch EAP sessions from the "eap" module to the
"eap2" module.
Again refer above, if I get eap2 module running with PEAPv1 support, it should support both PEAPv0 and PEAPv1. I am assuming that configuring the eap2 module should replace the eap module with regards to protocols (ie. don't configure a protocol in both only in one or the other). It is a matter of getting FR setup to support a higher level of PEAP using the eap2 module. The protocol should then negotiate to the lower protocol if the client requests PEAPv0 instead of PEAPv1.
Post by Alan DeKok
Read eap.conf. Look for "gtc". This is documented. It works in the default install.
Noted. Also based on the RFC it was a miss-understanding of the protocols by me. Once I re-read the RFC, I now understand that I was using GTC and PEAPv1 interchangeably when I should not have been. GTC is available under PEAPv0 and PEAPv1. I needed to refer to PEAPv1 not just GTC. Our product is designed to use PEAPv1/GTC or PEAPv0/MSCHAP, and that was where I got confused.

Thanks for the info Alan. I will be working on the hostapd compile and recompile of FR to support PEAPv1.

I hope that if anyone else stumbles across this thread they leave with a better understanding of how PEAP is supported in FreeRADIUS, and how a PEAP implementation should work with the client to negotiate the connection.

-Ward Hopeman


This message is intended only for the named recipient. If you are not the intended recipient, you are notified that disclosing, copying, distributing or taking any action based on the contents of this information is strictly prohibited.

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Alan DeKok
2012-03-05 15:45:23 UTC
Permalink
Post by Hopeman, Ward
This is where I got confused, I missed the foot notes that PEAPv1 was only available in the experimental build with the eap2 module.
Yes. FR doesn't support PEAPv1 natively.
Post by Hopeman, Ward
Post by Alan DeKok
Don't use PEAPv1. It's even less documented than PEAPv0. It's used by pretty much no one.
This unfortunately is not by choice on my part. I am required to provide lab setups for testing our products, based on what is in the product requirement documents. This falls into what our product managers want to support.
I'm familiar with product managers. Unfortunately, all I can do here
is to talk about reality. Product managers live in another world.
Post by Hopeman, Ward
Post by Alan DeKok
Don't use LEAP. It's insecure. Don't put it into new products, and don't allow people to configure it.
As above, not really my choice, but I can't agree more. Fortunately this protocol seems to be for legacy support. I have been and continue to make recommendations to our product managers to remove support for unused and unsecure protocols.
Adding LEAP is like saying "use insecure protocol that allows anyone
to access my network."

I think that's bad. Product managers don't care.
Post by Hopeman, Ward
The client is not falling back to PEAPv0 as one might expect, and when I questioned the developers on this they told me it was working as designed. They want to ensure that when it gets configured for a specific protocol, that it fails unless it meets the requirements. Since our products go into controlled install environments, they wanted to tighten up the authentication requirements. Not robust, or quite following the RFC, but as designed. In this case refer above as the client was expecting v1.
That makes sense. But it should be an option.
Post by Hopeman, Ward
Again refer above, if I get eap2 module running with PEAPv1 support, it should support both PEAPv0 and PEAPv1. I am assuming that configuring the eap2 module should replace the eap module with regards to protocols (ie. don't configure a protocol in both only in one or the other). It is a matter of getting FR setup to support a higher level of PEAP using the eap2 module. The protocol should then negotiate to the lower protocol if the client requests PEAPv0 instead of PEAPv1.
Be aware that the eap2 module has *minimal* integration with the rest
of the server. The "inner-tunnel" virtual server won't work, etc.

Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Loading...